Model FACM
Fresh Air Controller
The FACM Fresh Air Controller meets the requirements of ASHRAE 62.2 and Title24 while minimizing the discomfort
that can occur when bringing fresh air into a home.
Monitors heating, cooling and ventilation calls and tries to fulfil fresh air minutes of operation during calls to minimize consumer discomfort.
Activates the equipment G terminal whenever the thermostat G terminal is active.
Minutes of fresh air operating time each hour is set with Time control on the board.
Set high and low temperature limits using controls on the board.
Outdoor temperature sensor can be used to limit fresh air operation in severe weather.
Use plug and play damper or wired power open/close or spring return damper.
Output terminals FANR and RANC control a relay used to activate an auxiliary, 115VAC fan.
Jumper plug selects activating both equipment G terminal and the auxiliary fan or only the auxiliary fan when fresh air operation is required and no call is detected.
Use an optional variable position (modulating) damper with a simple wall control to adjust damper position during fresh air operation.
Plug and Play Damper
Available in 4", 5" and 6" Diameters
Larger Diameters also available
Wired, Power Open/Close Damper
Available in 4", 5" and 6" Diameters
Larger Diameters also available
Wired, Power Open/Close Damper
Includes variable position wall control.
Available in 4", 5" and 6" Diameters
Larger Diameters also available
Coming Soon
26072 Merit Circle #110 / Laguna Hills, CA 92653 949-916-0945 / Fax 949-458-8502
eControls
Make sure you're viewing the latest version of our website by clicking the refresh button on your navigation bar.